GOODWAY CNC Machining company logo

GLS-150 Series
SPINDLE GLS-150 GLS-200
Hole through spindle Ø 61 mm Ø 76 mm
Spindle bearing diameter Ø 90 mm Ø 110 mm
Hydraulic cylinder Ø 8" Ø 10"
Spindle nose A2-5 A2-6
Motor output ( Cont. / 30 min. ) 11 / 15 kW ( 15 / 20 HP )
Motor full output speed 750 rpm
Spindle drive system Direct Belt Drive
Spindle drive ratio 1 : 1 ( Opt. 211 : 151 ) 1 : 1 ( Opt. 211 : 171 )
Spindle speed range 60 ~ 6,000 rpm 45 ~ 4,500 rpm
Spindle full output speed 750 rpm
BUILT-IN SPINDLE MOTOR ( OPTIONAL )
Spindle motor type αB112M / 15,000i ---
Motor output ( Cont. ) 5.5 kW ( 7.4 HP ) ---
Motor output ( 30min. / Peak ) 7.5 kW ( 10 HP ) ---
Bar capacity Ø 45 mm ---
Cs-AXIS SPINDLE ( OPTIONAL )
Cs-axis drive motor Bz-sensor
Min. spindle indexing angle 0.001°
Dynamic accuracy ± 0.02°

Specifications are subject to change without notice.

*1 Individual models may vary, please see interference drawings.

*2 For M ( Live-tooling turrect ) models only.

*3 Work piece supported by chuck & tailstock.