| TURRET | GS-200 / L | GS-260 / L | GS-280 / L |
|---|---|---|---|
| Stations | 12 T | ||
| Indexing drive | FANUC AC Servo motor | ||
| Indexing speed | 0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | ||
| Accuracy | Positioning: ± 0.00069°, Repeatability: ± 0.00027° | ||
| OD tool shank size | □ 25 mm | ||
| ID tool shank size | Ø 40 mm | ||
| LIVE TOOLING TURRET ( OPTIONAL ) |
GS-200 / L | GS-260 / L | GS-280 / L |
|---|---|---|---|
| Stations | 12 T | ||
| Live tooling stations | 12 T ( Live tooling tools rotate in working position only. ) | ||
| Live tooling drive motor | AC 4.5 kW ( 6 HP ) | ||
| Live tooling torque | 22 Nm 16 lb-ft ( Cont. ) | ||
| Indexing drive type | FANUC AC Servo motor | ||
| Index speed | 0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | ||
| OD tool shank size | □ 25 mm | ||
| ID tool shank size | Ø 40 mm | ||
| Live tooling shank size | 1 ~ 20 mm ER 32 collets | ||
| Live tooling rpm range | 10 ~ 4,000 rpm | ||
Specifications are subject to change without notice.
*1 Individual models may vary, please see interference drawings.
*2 Work piece supported by chuck & tailstock.
*3 Chucks optional.
*4 Optional 10" Big-bore hydraulic cylinder & chuck provide Ø 78 mm bar capacity.
Top