| GA-2000 Series |
|---|
| TAILSTOCK | GA-2000 | GA-2800 |
|---|---|---|
| Quill center taper | MT #4 ( Live Center ) | |
| Quill diameter / travel | Ø 70 mm / 150 mm | |
| Tail stock base travel *1 | Fixed / 550 / 1,140 mm | |
| Programmable quill / base | Yes / Yes ( Not available on GA-2000/300 series ) | |
| Programmable base type | Positioned by Z-axis carriage | |
| PARTS CATCHER ( OPTIONAL ) | ||
| Maximum part diameter | Ø 77 mm | |
| Maximum part length | 150 mm | |
| GENERAL | ||
| Positioning accuracy | 0.01 mm | |
| Repeatability | ± 0.003 mm | |
| Standard CNC control | FANUC Oi -TF | |
| Voltage / Power requirement | AC 200 / 220 + 10% to - 15% 3 phase / 26 KVA | |
| Hydraulic tank capacity *1 | 30 / 40 / 40 L | |
| Coolant tank capacity | 145 L ( GA-2000/300 : 100 L ) | |
| Coolant pump | 3 bar rated at 42.6 PSI | |
| Machine weight *1 | 3,500 / 4,000 / 4,600 kg | |
| Dimensions L × W × H *1 ( Machine ) |
2,014 x 1,630 x 1,725 2,445 x 1,630 x 1890 3,345 x 1,630 x 1,845 mm |
|
| Dimensions L × W × H *1 ( Machine w/ chip conveyor ) |
2,014 x 2,360 x 1,725 3,429 x 1,630 x 1,890 4,112 x 1,630 x 1,845 mm |
|
Top
Specifications are subject to change without notice.
*1 GA-2000/300 || GA-2000 || GA-2000L
*2 Work piece supported by chuck & tailstock.
*3 Individual models may vary, please see interference drawings.